RUT200 er en smart lille trådløs enhed, men yderst kraftfuld Ethernet-router perfekt til udfordrende industrielle netværksopgaver såvel som generelle netværksapplikationer.

Den har to Ethernet-porte, én WAN og én til LAN, samt slot til SIM-kort.

En fantastisk WAN-failover enhed, der sikrer forbindelsen, uanset hvor enheden befinder sig.

En forudkonfigureret firewall sikrer øjeblikkelig sikkerhed, og der er adgang til flere topkarakter VPN'er.

Det er en økonomisk, men funktionel industrimodel, der leveres med alle fordelene ved RutOS og Remote Management System (RMS).

OBS: Der medfølger ikke DIN-kit til enheden. - Find det her

Kontakt os for yderligere tilbehør, såsom antenner, antennekabler.

Teltonika RUT200 Specifikationer

Specifikationer

Egenskab Oplysninger
Fabrikant Teltonika
Model RUT200
Type Trådløs industriel router
Antal pakker 1
Modem
  • Type: Trådløs mobilmodem
  • Formfaktor: Ekstern
  • Mobilprotokol: GSM, LTE, WCDMA
  • Maks. overførselshastighed: 150 Mbps
Antenneformfaktor Aftagelig eksternt
Antal antenner 3
Hardwarespecifikation
  • Formfaktor: DIN monterbar på skinne
  • Forbindelsesteknologi: Kabling, Trådløs
Antenneformfaktor Aftagelig eksternt
Antal antenner 3
Hardwarespecifikation
  • Formfaktor: DIN monterbar på skinne
  • Forbindelsesteknologi: Kabling, Trådløs
  • Interface: 1 x DI, 1 x DO, Antenne: 1 x RP-SMA, Antenne: 2 x SMA, LAN: 1 x 10Base-T/100Base-TX - RJ-45, WAN: 1 x 10Base-T/100Base-TX - RJ-45
Antal WAN porte 1
Dataforbindelsesprotokol Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Kapacitet Samtidige tilslutninger: 50
Min. driftstemperatur -40 °C
Maks. driftstemperatur 75 °C
Fugtighedsgrad ved brug 10 - 90 % (ikke-kondenserende)
Sikkerhed
  • Krypterings algoritme: 128-bit AES, 192-bit AES, 256-bit AES, 3DES, AES-CCMP, DES, IKEv1, IKEv2, MODBUS, PEAP, SSL 3.0, TKIP, TLS, WEP, WPA-EAP, WPA-PSK, WPA2-Enterprise, WPA2-PSK
  • Protokol til fjernadministration: DHCP, JSON-RPC, Modbus, MQTT, SMNP, SMPP, SNMP 1, SNMP 2, SNMP 3, SSH, SSH-2, Telnet, TR-069
  • Autentificeringsmetode: X.509 certifikater
Dimensioner og vægt
  • Bredde: 8.3 cm
  • Dybde: 7.4 cm
  • Højde: 2.5 cm
  • Vægt: 125 g
RUT200 Specifikationer

RUT200 Specifikationer

Kategori Specifikation
Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
3GPP Release Release 9
Status IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD Supports sending and reading Unstructured Supplementary Service Data messages
Black/White list Operator black/white list (by country or separate operators)
Multiple PDN Possibility to use different PDNs for multiple network access and services
Band management Band lock, Used band status display
APN Auto APN
Bridge Direct connection (bridge) between mobile ISP and device on LAN
Passthrough Router assigns its mobile WAN IP address to another device on LAN
Band management Band lock, Used band status display
APN Auto APN
Bridge Direct connection (bridge) between mobile ISP and device on LAN
Passthrough Router assigns its mobile WAN IP address to another device on LAN
WIRELESS
Wireless mode IEEE 802.11b/g/n, Access Point (AP), Station (STA)
Wi-Fi security WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
SSID/ESSID SSID stealth mode and access control based on MAC address
Wi-Fi users Up to 50 simultaneous connections
Wireless Connectivity Features Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
Wireless MAC filter Whitelist, blacklist
Wireless QR code generator Once scanned, a user will automatically enter your network without needing to input login information.
NETWORK
Hotspot Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forward, traffic rules, custom rules
Firewall status page View all your Firewall statistics, rules, and rule counters
Ports management View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
Network topology Visual representation of your network, showing which devices are connected to which other devices
DHCP Static and dynamic IP allocation, DHCP Relay
QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS Supported >25 service providers, others can be configured manually
Network backup Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
Load balancing Balance Internet traffic over multiple WAN connections
SSHFS Possibility to mount remote file system via SSH protocol
SECURITY
Authentication Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN Port and tag-based VLAN separation
Mobile quota control Mobile data limit, customizable period, start time, warning limit, phone number
WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control Flexible access control of SSH, Web interface, CLI and Telnet
VPN
OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods
OpenVPN Encryption DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN Method of building scalable IPsec VPNs
SSTP SSTP client instance support
ZeroTier ZeroTier VPN client support
WireGuard WireGuard VPN client and server support
Tinc Tinc offers encryption, authentication and compression in its tunnels. Client and server support.
OPC UA
Supported modes Client, Server
Supported connection types TCP
MODBUS
Supported modes Server, Client
Supported connection types TCP
Custom registers MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
Supported data formats 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
DATA TO SERVER
Protocol HTTP(S), MQTT, Azure MQTT, Kinesis
Data to server Extract parameters from multiple sources and different protocols, and send them all to a single server
MQTT GATEWAY
MQTT Gateway Allows sending commands and receiving data from MODBUS Server through MQTT broker
DNP3
Supported modes TCP Master, DNP3 Outstation
DLMS
DLMS Support DLMS - standard protocol for utility meter data exchange
API
Teltonika Networks Web API (beta) support Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
MONITORING & MANAGEMENT
WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA Firmware update from server, automatic notification
SSH SSH (v1, v2)
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT MQTT Broker, MQTT publisher
SNMP SNMP (v1, v2, v3), SNMP Trap
JSON-RPC Management API over HTTP/HTTPS
RMS Teltonika Remote Management System (RMS)
IOT PLATFORMS
Cloud of Things Allows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorx Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
Azure IoT Hub Can send device IP, Number of bytes sent/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
SYSTEM CHARACTERISTICS
CPU Mediatek, 580 MHz, MIPS

Produktoplysninger

6 Varer

Produktinformation

Netværksenhed
Router
Antal netværksporte
2
Forbindelsestype
Trådløs

Specifikke referencer

EAN-13
4779051840229
MPN
RUT200010000

Teltonika RUT200 - WiFi Ethernet Router - 2-port DIN-skinne til industri

SKU ST383-RUT200-2P-WiFi Kategori Tavlekomponenter
780,00 kr.
Ekskl. moms
Antal
  På lager

 

Handelsbetingelser

 

Privatlivspolitik

På lager

Teltonika RUT200 2-ports WiFi Ethernet-router til DIN-skinne montering

OBS: Der medfølger ikke DIN-kit til enheden. - Find det her

Optimer dit industrielle netværk med denne 2-ports router fra Teltonika! Denne router giver hurtig og pålidelig forbindelse til flere enheder via Wi-Fi i DIN-skinne monterede miljøer som tavlebyg og kontrolpaneler og sørger for adgang til WAN.

I pakken medfølger:

  • Router RUT200
  • 9 W PSU
  • 2x LTE antenner (SMA hanstik)
  • 1x Wi-Fi antenne (RP-SMA hanstik)
  • QSG (Quick Start Guide)

Har du spørgsmål eller
brug for hjælp?

Kontakt Jimmy direkte på +45 2211 4684 for personlig assistance, eller planlæg et online møde med ham.

Jimmy hjælper kunder

Dine sidste besøgte produkter